[Setting Bug] The filament `setting overrides - ironing` setting not correct issue.

[yuanhsu]

Is there an existing issue for this problem?

• I have searched the existing issues

OrcaSlicer Version

1.7.11

Operating System (OS)

macOS

OS Version

macOS 15.7.7

Additional system information

No response

Printer

Creator 5 Pro / 5M / 5M Pro

How to reproduce

1. Setting the ironing flow/speed for each filament on fliament setting overrides page.
2. Check the gCode after slicing

Cube_PETG_31m51s.gcode.txt

Actual results

Refer to Cube_PETG_31m51s.gcode.txt

; filament_ironing_flow = 40%,25%,10%,35%
; filament_ironing_spacing = nil,0.15,0.1,0.15
; filament_ironing_speed = 60,100,60,100
; ironing_angle = 0
; ironing_angle_fixed = 0
; ironing_fan_speed = -1,-1,-1,-1
; ironing_flow = 15%
; ironing_inset = 0
; ironing_pattern = rectilinear
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top

;TYPE:Ironing
;WIDTH:0.404292
;HEIGHT:0.02
G1 F900 <= speed 15mm/s not 60mm/s

Expected results

; filament_ironing_flow = 40%,25%,10%,35%
; filament_ironing_spacing = nil,0.15,0.1,0.15
; filament_ironing_speed = 60,100,60,100
; ironing_angle = 0
; ironing_angle_fixed = 0
; ironing_fan_speed = -1,-1,-1,-1
; ironing_flow = 15%
; ironing_inset = 0
; ironing_pattern = rectilinear
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top

;TYPE:Ironing
;WIDTH:0.404292
;HEIGHT:0.02
G1 F3600 <= 60mm/s

Project file & Debug log uploads

Cube_PETG_31m51s.gcode.txt

Checklist of files to include

• Log file
• Project file

Anything else?

Please refer to OrcaSlicer/OrcaSlicer#11194 and OrcaSlicer/OrcaSlicer@c0c1ddf patch.